PD4-E591L42-EB-65-2 – Stepper motor with integrated controller IP65 – NEMA 23/24 New

Under „Downloads“ you will find the technical manual that corresponds with the stock firmware. Please refer to the new technical manual (FIR-v2039) when using Plug & Drive Studio 2.
Availability
- 8 in Stock
Technical Data
-
Size
-
Interface CANopen
-
Operating Voltage 12 VDC - 48 VDC
-
Peak Current (RMS) 4.2 A
-
Type of Digital Inputs 5/24 V switchable
-
Type of Analog Input 0-20 mA/0-10 V switchable
-
Type of Digital Output open-drain (max. 24 V/100 mA)
-
Encoder Type single-turn absolute
-
Length
-
Brake
-
NEMA 23
-
Holding Torque
-
Rated Current (RMS) 4.2 A
-
Number of Digital Inputs 6
-
Number of Analog Inputs 1
-
Number of Digital Outputs 2
-
Encoder
-
Encoder Resolution 1024 CPR
-
Weight
-
Holding Torque (Brake)
Dimensions

Torque Curves
|
||
---|---|---|
Downloads
Datasheets
Manuals
Software
Certificates
Knowledge Base
Closed-loop field-oriented control is a method of running stepper motors much like a servo motor, i.e. smoothly, with low resonance and position-controlled.
To reduce the length of the wiring harnesses in vehicles and save on weight, the Bosch company developed the so-called CAN bus for networking control units in 1987. CAN is the abbreviation for "Controller Area Network" and is often used in combination with "bus" (Binary Unit System) to describe a system for the transmission of data between different devices on a shared transmission path.
CANopen is a communication protocol...
Accessories
Z-K4700/50 | Capacitor | € 4,30 |
|
ZK-M12-5-2M-1-B-S | Power straight, 2m | € 18,80 |
|
ZK-M12-12-2M-1-AFF | IO straight, 2m | € 34,00 |
|
ZK-M12M-M8F-5-200-S | CAN out straight, 0.2m | € 14,10 |
|
ZK-M12F-M8M-5-200-S | CAN in straight, 0.2m | € 14,10 |
|
ZK-M12-5-2M-1-A-S-M | CAN out straight, 2m | € 14,10 |
|
ZK-M12-5-2M-1-AFF | CAN in straight, 2m | € 18,20 |
|
ZK-M12M-M12F-5-500-S | CAN in/out straight, 0.5m | € 34,10 |
|
Order & Configure
Configure
You can configure this article with others. Please click the configure button below to start.