N5 –  Motor controllers for CANopen, EtherCAT, EtherNet/IP or Modbus RTU/TCP

TO DISPLAY TORQUE CURVE COMPARISON:

1. Filter matching motors by using the attributes Torque at Speed and Thrust. Under Results you will find a checkbox at the end of each line.
2. Check at least two products.
3. Click on SHOW. The torque curves are displayed.
   
   

TO USE THE TORQUE CURVE COMPARISON:

• Each color represents a motor.
• Different motors can have identical torque curves. They will appear as one curve.
• The desired attributes for each motor will be displayed by clicking on the boxes on the right of the legend.
• Solid torque curves represent thrust, and dashed torque curves represent output power.
• In the torque curve, click on the point you want to use as a comparison point with the help of the vertical red line. In the legend the speed values will be displayed.
• Within the legend and for each motor you can:
• obtain more information
• add the motor to the shopping cart
• delete the motor from the torque curve comparison
  
  

FURTHERMORE YOU CAN:

• download the current torque curve as a PDF file
• compare values at a specific working point
• switch axes
• switch between linear or logarithmic axis scaling
• filter by voltage

TO SWITCH BETWEEN RESULT LIST VIEWS:

Under Results on the right, click on the button

• for table or
• for article list
  
  

TO SORT THE TABLE:

Click on the attribute name in order to sort in ascending or descending order.

TO FILTER BY ARTICLE CONFIGURATION:

1. In the FILTER open SHOW CONFIGURATIONS to select elect
   • • Yes to display configurations also
     • Only to display configurations only
2. To find combinations of motors and encoders and/or brakes, add the attributes Brake and/or Encoder to the FILTER.
3. Use more attributes to filter and reduce the number of results.