SCB6018 – Stepper motor with FluxFocus technology – NEMA 24

Ultra high-torque stepper motor with integrated connector and 60 mm flange. By inserting rare earth magnets between the stator teeth, stray magnetic flux is redirected into the teeth, resulting in a holding torque of up to 3.6 Nm.

The SCB6018 motor comes with a second shaft for mounting an optical or magnetic encoder.

Highest torque/size ratio of all NEMA 24 stepper motors on the market due to FluxFocus technology
Torque improvement over the whole speed range
1.8° step angle
Improved efficiency

When you have selected a motor, you will find a matching encoder quickly and easily with the help of our product configurator.

Matching motor controllers:
C5-E, CL4-E

Benefits

Motor with FluxFocus technology

Additional permanent magnets between the stator teeth help to concentrate the magnetic flux in the stator teeth. This way flux leakage is reduced and the overall torque performance improves.

Torque curve comparison

Motors with FluxFocus technology reach a higher torque over the whole speed range than standard stepper motors of the same size.

Standard motor

In standard stepper motors only a certain amount of the magnetic flux is used to generate torque. The non-torque producing flux or flux leakage flows past the stator teeth.