Back-EMF protection with charge capacitor and brake chopper Smooth out unwanted voltage spikes and protect your controller. More details
Configuration files for clock-direction and analog mode Our C5 controller is preprogrammed for clock-direction and analog speed mode. Here you find the applicable and documented configuration files to edit all settings for these modes… More details
Switching of a load or PLC via the outputs of the motor controller/Plug & Drive motor The motor controllers and motors with integrated controllers have open collector outputs. To switch a load or PLC, you require a relay according to this circuit diagram. The flyback diode… More details
Applying 24V to 5V only digital inputs The CL3-E controller/drive has 5 V inputs. If a 24 V control signal is to be applied, it will require a 57 kOhm (0.25 W) resistor be connected in series to each input in use. More details
Applying 24V to 5V only digital input for SMCI Series The controllers SMCI12, SCMI36 and SCMP33 have 5 V inputs. If a 24 V control signal is to be applied, it will require a 39 kOhm (0.25 W) resistor be… More details
