PD2-C - Smart Servo Motor with 42 mm Flange Size - NEMA 17New
With a flange size of 42 mm, the motors of the PD2-C series are ideally suited for applications that require less torque or have space constrictions, such as in laboratory automation. Both the controller and the encoder are already integrated. The controller can be accessed via USB or CANopen.
The stepper motor version has a nominal torque of up to 0.5 Nm and an operating voltage of 12-48 V. Due to its field-oriented control, the stepper motor behaves like a high-pole DC servo – with a higher torque but a lower nominal speed than a BLDC motor. Therefore many applications can be realized without a gear.
|Operating voltage||12-48 VDC +/-5%|
|Phase current eff.||1.8 A|
|RMS for 1 S||3 A|
|Integrated encoder||Magnetic single-turn absolute encoder, 1024 CPR|
|Operating modes||Torque, speed, position, homing, cyclic synchronous setpoint|
Over-/under voltage protection, over temperature protection (>75°C), reverse polarity protection (Short-circuit +UB and GND for reverse polarity, a fuse between the power supply and the controller is necessary!)
|Target value specification/programming||Clock-direction, analog input, NanoJ V2, USB|
|Inputs||3 digital inputs (24 V), 3 digital inputs (5 V or 24 V, single ended or differential, configured by software), 1 analog input 10 Bit, 0-10 V or 0-20 mA (configured by software)|
|Outputs||2 transistor outputs (Open Drain, max. 24 V/100 mA) 1 10 VDC output (max. 200 mA)|
|Target value specification/programming||CANopen, NanoJ V2|
|Inputs||4 digital inputs (5 V or 24 V, separately configured by software), 1 analog input 10 Bit, 0-10 V or 0-20 mA (configured by software)|
|Outputs||3 transistor outputs (Open Drain, max. 24 V/100 mA), 1 output 10 VDC (max. 200 mA)|
For current software and manual versions please have a look in the archive.
Please click on the respective product in the list below to download datasheets.
|ZK-MICROUSB||USB Cable||€ 6,70|
|ZK-PD4-C-CAN-4-500-S||CANopen Cable||€ 6,60|
|Z-K4700/50||Charging Capacitor||€ 4,10|
|Type||Holding Torque||Weight||Length "A"||Options||Price||Basket||Configuration|
Click to open article details
Request an offer
Request an offer
if you want an offer, you first must log in or register. In the cart you can easily get a quote on your desired items by using the "Request an offer" button.
Here you will find a little guide.
Would you like a quote on larger quantities, please contact our customer support department.