3225h Analog Input Switches Function This object contains the value of the rotary switch that is used to configure the address of the controller . The switch position is only read during a restart one time. Object description Index 3225h Object name Analog Input Switches Object Code ARRAY Data type UNSIGNED16 Savable no Access read only PDO mapping no Allowed values Preset value Firmware version FIR-v1436 Change history Firmware version FIR-v1436: "PDO mapping" table entry for subindex 01 changed from "RX-PDO" to "TX-PDO". Value description Subindex 00h Name Number Of Entries Data type UNSIGNED8 Access read only PDO mapping no Allowed values Preset value 01h Subindex 01h Name Analog Input Switch #1 Data type UNSIGNED16 Access read only PDO mapping TX-PDO Allowed values Preset value 0000h Description If the controller is equipped with a rotary switch, the value of the rotary switch is displayed in subindex 01h. If the controller is equipped with two rotary switches, the value of the rotary switch is displayed in subindex 01h, which consists of switch 1 and 2.