1010h Store Parameters
Function
This object is used to start the saving of objects.
Object description
| Index | 1010h |
| Object name | Store Parameters |
| Object Code | ARRAY |
| Data type | UNSIGNED32 |
| Savable | no |
| Firmware version | FIR-v1426 |
| Change history |
Firmware version FIR-v1436: "Object name" entry changed from "Store Parameter" to "Store Parameters". Firmware version FIR-v1436: The number of entries was changed from 3 to 4. Firmware version FIR-v1512: The number of entries was changed from 4 to 5. Firmware version FIR-v1540: The number of entries was changed from 5 to 7. |
Value description
| Subindex | 00h |
| Name | Highest Sub-index Supported |
| Data type | UNSIGNED8 |
| Access | read only |
| PDO mapping | no |
| Allowed values | |
| Preset value | 06h |
| Subindex | 01h |
| Name | Save All Parameters To Non-volatile Memory |
| Data type | UNSIGNED32 |
| Access | read / write |
| PDO mapping | no |
| Allowed values | |
| Preset value | 00000001h |
| Subindex | 02h |
| Name | Save Communication Parameters To Non-volatile Memory |
| Data type | UNSIGNED32 |
| Access | read / write |
| PDO mapping | no |
| Allowed values | |
| Preset value | 00000001h |
| Subindex | 03h |
| Name | Save Application Parameters To Non-volatile Memory |
| Data type | UNSIGNED32 |
| Access | read / write |
| PDO mapping | no |
| Allowed values | |
| Preset value | 00000001h |
| Subindex | 04h |
| Name | Save Customer Parameters To Non-volatile Memory |
| Data type | UNSIGNED32 |
| Access | read / write |
| PDO mapping | no |
| Allowed values | |
| Preset value | 00000001h |
| Subindex | 05h |
| Name | Save Drive Parameters To Non-volatile Memory |
| Data type | UNSIGNED32 |
| Access | read / write |
| PDO mapping | no |
| Allowed values | |
| Preset value | 00000001h |
| Subindex | 06h |
| Name | Save Tuning Parameters To Non-volatile Memory |
| Data type | UNSIGNED32 |
| Access | read / write |
| PDO mapping | no |
| Allowed values | |
| Preset value | 00000001h |
Description
Each subindex of the object stands for a certain memory class. By reading out the entry, it is possible to determine whether (value "1") or not (value="0") this memory category can be saved.
To start the save process of a memory category, value "65766173h" must be written in the corresponding subindex. This corresponds to the decimal of 1702257011d or the ASCII string
save. As soon as the saving process is completed, the save command is again overwritten with the value "1", since saving is possible again.
For a detailed description, see chapter Saving objects.