Categories for Accessories

Connection cables

Pre-assembled connection cables with high temperature resistance for reducing installation effort. These robust cables come with connectors and prevent errors during wiring. They are highly resistant…


The D28, D40 and D56 dampers from Nanotec can be mounted on all stepper motors with a double shaft (size 28-59 mm). Apart from the improved settling time, system resonance is suppressed and vibration…
  • Corresponding Motors ST28, ST35, ST41, ST42, ST59 
  • Suitable for (Damper) for B-Shaft, for Mounting Flange 


Charging capacitors for controllers or brushless DC servo motors with integrated controller (stepper motors) for temporarily buffering the generator voltage produced when braking. 
  • Capacity 4700 μF - 10000 μF
  • Max. Operating Voltage 50 V - 100 V
  • Temperature Range -40 °C - 85 °C


Converter cables for SMCIxx controllers and brushless DC servo motors that communicate via RS485/RS232. Please note: For installing an RS485 network, please refer to our instructions in the manual…
  • Cable Length


Standard connectors and contacts for assembling motors, brakes and encoders, etc. Please note: Suitable crimping pliers (JST WC-110) are required for the JST-XHP connectors. No special tools are…
  • Pin Configuration 2  - 12 

Switching power supplies

Switching power supplies serve as a constant voltage and current source for ensuring a constant output voltage and thus a constant torque at different loads. Advantages: Efficiency of up to…
  • Output Voltage 12 V - 48 V
  • Output Current 2.5 A - 20 A
  • Power Output 42 W - 960 W
  • Input Current (Cold Start) (230 VAC) / 56, (230 VAC) / 40, (230 VAC) / 35, (230VAC) / 35, (230VAC) / 50 A


Grease on a semi-synthetic basis with a special metal complex soap thickener for highly loaded plain and roller bearings that are exposed to humidity and water. Protects against corrosion. Please…

Supplements for GSGE gearboxes

By inserting the double-insert shaft into the standard hollow shaft of the GSGE worm gear, the gearbox can be extended on both sides. The shaft cover seals the shaft end and provides protection…
  • Suitable for for GSGE60 Gears, for GSGE80 Gears 


Nanotec offers keys as an accessory for motors with milled keyway.

Accessories Product List

Please wait while productfinder is loading ...

{{ curve.panelTitle }}

Torque [Nm] at {{ curve.comparePoint | number : 2 }} rpm Speed [rpm] at {{ curve.comparePoint | number : 2 }} Nm
{{ dataRow.max_power }}A {{ dataRow.voltage }}V {{ dataRow.wiring }} {{ curve.calculateValueAtPoint(dataRow) }}

{{ curve.panelTitle }}

Force [N] at {{ curve.comparePoint | number : 2 }} mm/s Speed [mm/s] at {{ curve.comparePoint | number : 2 }} N
{{ dataRow.max_power }}A {{ dataRow.voltage }}V {{ dataRow.wiring }} {{ curve.calculateValueAtPoint(dataRow) }}
Instructions/Help Share results

{{ pfinder.totalResults }} Results