BRAKE-BCD56-1,5-8 – Spring-loaded brake
Volume Discount
- 1 - 4
- € 139,90
- 5 - 9
- € 132,90
- 10+
- € 125,91
Availability
- 0 in Stock
- More articles available after 1/Jun/2022.
The BCD brake is designed as a holding brake for BLDC and stepper motors with flange size NEMA 23/24. It is attached to the front of the motor and is equipped with its own mounted shaft as well as an NEMA 23 flange. As a result, the same flange connection as that on a motor without brake can be used and a planetary gearbox can be additionally coupled to the shaft.
- Min. 1.5 Nm holding torque
- 24 V operating voltage
- Very little rotary play
- No auditory noise
- Rated IP65
This brake is ideal for use with loads suspended in vertical axes as well as for conveyor belts and transport systems or medical applications such as X-ray equipment and microscopes.
As the BCD brake is mounted on the front flange, it can be combined extremely well with motors without a second shaft end, e.g. motors with integrated electronics.
Technical Data
-
Operating Voltage (Brake) 24 VDC
-
Holding Torque (Brake)
-
Size
-
Hub clamping connection
-
Connection connector M8
-
Switch-On Time 60 ms
-
Rated Power 7.2 W
-
Shaft Diameter
-
Moment of Inertia 4.63 kg mm²
-
Fastening with 4 M4 screws
-
Switch-Off Time 20 ms
-
Weight
Dimensions

Downloads
Datasheets
Certificates
Accessories
ZK-M8-3-2M-1-AFF | Connection cable M8 | € 19,40 |
|