LSA – External linear actuators Linear actuators Linear Actuator Functionalities: See How Linear Actuators Work! In the case of external linear actuators, the lead screw is permanently attached to the motor shaft and turns with the shaft when the motor is energized. If an external threaded nut – in standardized or anti-backlash version – is mounted on the lead screw and secured against rotating by an external guide, the threaded nut moves along the lead screw. Two motor lengths per NEMA size Various windings Different lead screw lengths and lead screw versions Can optionally be configured with encoder Can be combined with external threaded nuts (standardized or anti-backlash) Integrated connector External linear actuator Generation Flange size Phase angle: 1=1.8°, 0=0.9° Length: S, M, L, … Current: 14=1.4 A per winding B-shaft: A=no B-shaft, B=with B-shaft Thread type: U=ACME, T=trapezoidal Thread diameter: K=6.35 mm, see thread matrix Thread lead: GI=6.35 mm, see thread matrix Screw length: 102=102 mm, 152=152 mm Thread diameter mm inch D 3.5 0.138 E 3.5052 0.138 G 4.7625 0.1875 H 5 0.19685 I 5.55625 0.21875 J 6 0.23622 K 6.35 0.25 Q 9.525 0.375 S 10 0.393701 *Customized Thread lead mm inch AI 03048 0.012 AP* 0.6096 0.024 AQ 0.635 0.025 AS 0.79375 0.03125 BA 1 0.03937 BF* 1.2192 0.048 BG* 1.27 0.05 BN 1.5875 0.0625 CA 2 0.07874 CB 2 0.07874 CD* 2.116836 0.08334 CL* 2.4384 0.096 CN* 2.54 0.1 DE* 3.175 0.125 EB* 4 0.15748 EG* 4.2333 0.1667 EV 4.8768 0.192 FC* 5.08 0.2 GA 6 0.23622 GI* 6.35 0.25 IA* 8 0.314961 JS 9.7538 0.384 KE* 10.16 0.4 MS* 12.7 0.5
