Brushless dc motors with gearbox

Proceed as follows to refine the list of results below:

Enter the desired rated speed and rated power.
Define other parameters to refine your results.
Sort the results according to the desired attributes.

Please wait while productfinder is loading ...

Recommended load limit:
Maximum short-term static load that may be reached when the service life is taken into account.

Operating Point

Axes representation

Filter voltage

	Torque [Nm] at rpm

Recommended load limit:
Maximum short-term static load that may be reached when the service life is taken into account.

Operating Point

Axes representation

Filter voltage

	Torque [Nm] at rpm

Recommended load limit:
Maximum short-term static load that may be reached when the service life is taken into account.

Operating Point

Axes representation

Filter voltage

	Force [N] at mm/s
Rated Force Peak Force Recommended Load Limit

You can select up to 6 products for a torque curve comparison.

How to use the product finder

Product Finder instructions

To add and manage Attributes Compare torque curves Result list view and sorting Filter by configuration

Share results

SHARE PRODUCT FINDER RESULTS

Product finder

Category: BLDC motors with internal rotor, Flat BLDC motors with external rotor, PD2-CB, PD2-CB-IP, BLDC motors with controller/drive, PD4-CB, IP65 BLDC motors with encoder, PD4-EB, PD6-CB, PD6-EB, Brushless DC motors

Smart Servos – Motors with integrated controller/drive []
- BLDC motors with controller/drive []
- Stepper motors with controller/drive []
- Linear actuators with integrated controllers/drives []
Motor controllers/drives for BLDC and stepper motors []
- CSL3 []
- High-performance controllers / drives []
- Plug-in motor controllers / drives []
- CM-CPB3-44 []
Brushless DC motors []
- BLDC motors with internal rotor []
- Flat BLDC motors with external rotor []
- IP65 BLDC motors with encoder []
- DKA []
Stepper motors []
- Hybrid stepper motors []
- Flat motors []
- Hollow-shaft motors []
- Stepper motors IP65 []
Wheel drives for robotics []
- WD []
- WD42 []
LBA60 – BLDC linear actuator – 60 mm []
- LBA60 []
Linear actuators with stepper motors []
- LSA14 []
- NEMA 8 | 20 mm []
- NEMA 11 | 28 mm []
- NEMA 14 | 35 mm []
- NEMA 17 | 42 mm []
- NEMA 23 | 56 mm []
Lead screws and threaded nuts []
- Lead screws []
- Threaded nuts []
Gearboxes for BLDC and stepper motors []
- Hollow rotary tables []
- Planetary gearboxes []
- Worm gearboxes []
Encoders for BLDC motors and stepper motors []
- Optical encoders []
- Reflective encoders []
- Magnetic encoders []
- NMM1 []
Brakes for BLDC and stepper motors []
- BKE []
- BWA []
- BCD []
Accessories []
- Connection cables []
- Brake chopper []
- Damper []
- Spacer sleeves []
- Double shaft/cover for GSGE Gearboxes []
- Electronics []
- Capacitors []
- Converters []
- Keys []
- Switching power supplies []
- Lubricants []
- Connectors []
- Shaft modification []

Reset setting

Show Configurations: Only

Yes
No
Only

Explanation

Show Configurations

Yes = all articles and all configured articles*
No = all articles without configured articles*
Only = only configured articles*

*configured articles = articles with encoder, brake, gearbox, damper or shaft modification

Encoder

Yes []
No []

Setting this filter would yield no results with your current selection.

Explanation

Delete attribute

Encoder

Please choose whether configured articles with encoder should be shown or not.

Torque at Speed

0.001 Nm

3 Nm

0.001 : 3

0.001

From Nm

To Nm

100

At RPM

Explanation

Setting this filter would yield no results with your current selection.

Torque at Speed

Brake:

Yes []
No []

Setting this filter would yield no results with your current selection.

Explanation

Reset setting

Delete attribute

Brake

Please choose whether configured articles with brake should be shown or not.

Gearbox:

Yes []
No []

Setting this filter would yield no results with your current selection.

Explanation

Reset setting

Delete attribute

Gearbox

Please choose whether configured articles with gearbox should be shown or not.

Component Category

Setting this filter would yield no results with your current selection.

Explanation

Delete attribute

Component Category

Serves to select a product series.

Size

Setting this filter would yield no results with your current selection.

Explanation

Delete attribute

Size

Applicable to: Linear actuators with stepper motors, Gearboxes for BLDC and stepper motors, Smart Servos – Motors with integrated controller/drive, Brakes for BLDC and stepper motors, Stepper motors, LBA60 – BLDC linear actuator – 60 mm, Brushless DC motors

Flange size in mm

NEMA

Setting this filter would yield no results with your current selection.

Explanation

Delete attribute

NEMA

Applicable to: Linear actuators with stepper motors, Smart Servos – Motors with integrated controller/drive, Stepper motors, Brushless DC motors

Standardized size for stepper motors according to the "National Electrical Manufacturers Association"

Fieldbus

Setting this filter would yield no results with your current selection.

Explanation

Delete attribute

Fieldbus

Applicable to: Motor controllers/drives for BLDC and stepper motors, Smart Servos – Motors with integrated controller/drive

Interface

Setting this filter would yield no results with your current selection.

Explanation

Delete attribute

Interface

Applicable to: Motor controllers/drives for BLDC and stepper motors, Smart Servos – Motors with integrated controller/drive, Electronics

Communication options

Rated Power

0 W

0 : 0

From W

To W

Setting this filter would yield no results with your current selection.

Explanation

Delete attribute

Rated Power

Applicable to: Brushless DC motors, Brakes for BLDC and stepper motors, Smart Servos – Motors with integrated controller/drive

Mechanical output power

Rated Torque

0 Ncm

0 : 0

From Ncm

To Ncm

Setting this filter would yield no results with your current selection.

Explanation

Delete attribute

Rated Torque

Applicable to: Brushless DC motors, Smart Servos – Motors with integrated controller/drive

Maximum torque in continuous operation

Rated Speed

0 rpm

0 : 0

From rpm

To rpm

Setting this filter would yield no results with your current selection.

Explanation

Delete attribute

Rated Speed

Applicable to: Brushless DC motors, Smart Servos – Motors with integrated controller/drive

Rated operating point

Encoder Type

Setting this filter would yield no results with your current selection.

Explanation

Delete attribute

Encoder Type

Applicable to: Smart Servos – Motors with integrated controller/drive, Encoders for BLDC motors and stepper motors, LBA60 – BLDC linear actuator – 60 mm, Brushless DC motors, Stepper motors

Rated Voltage

0 V

0 : 0

From V

To V

Setting this filter would yield no results with your current selection.

Explanation

Delete attribute

Rated Voltage

Applicable to: Brushless DC motors, Smart Servos – Motors with integrated controller/drive, LBA60 – BLDC linear actuator – 60 mm, Stepper motors, Wheel drives for robotics

Rated Current

0 A

0 : 0

From A

To A

Setting this filter would yield no results with your current selection.

Explanation

Delete attribute

Rated Current

Applicable to: Brushless DC motors, LBA60 – BLDC linear actuator – 60 mm, Wheel drives for robotics

Peak Current

0 A

0 : 0

From A

To A

Setting this filter would yield no results with your current selection.

Explanation

Delete attribute

Peak Current

Applicable to: Brushless DC motors, LBA60 – BLDC linear actuator – 60 mm, Wheel drives for robotics

Add attribute

Size
NEMA
Interface
Encoder Type
Rated Power
Rated Torque
Rated Voltage
Rated Speed
Rated Current
Peak Current
Encoder
Torque at Speed
Brake
Gearbox
Show Configurations
Component Category
Fieldbus

Bolt Circle Add Filter
Applicable to: Lead screws and threaded nuts
Brake Output Add Filter
Applicable to: Motor controllers/drives for BLDC and stepper motors
Output for connecting a brake to the motor (e.g. BKE or BWA series from Nanotec)
Applicable to: Connection cables, Converters
Applicable to: Connection cables
Calculated Length Add Filter
Applicable to: Gearboxes for BLDC and stepper motors, Stepper motors, Linear actuators with stepper motors, Smart Servos – Motors with integrated controller/drive
CAN baudrates Add Filter
Applicable to: Converters
CAN interface Add Filter
Applicable to: Converters
Applicable to: Capacitors
Capacity of the integrated capacitors Add Filter
Applicable to: Brake chopper
Capacity of the integrated capacitors in uF.
Applicable to: Connection cables
Applicable to: Damper
Applicable to: Lead screws and threaded nuts, Linear actuators with stepper motors
Current per Winding Add Filter
Applicable to: Stepper motors, Linear actuators with stepper motors
Damper Add Filter
Please choose whether configured articles with damper should be shown or not.
Applicable to: Connectors
Applicable to: Double shaft/cover for GSGE Gearboxes
Applicable to: Capacitors, Electronics
Efficiency Add Filter
Applicable to: Gearboxes for BLDC and stepper motors, Wheel drives for robotics
Encoder Input Add Filter
Applicable to: Motor controllers/drives for BLDC and stepper motors
Encoder Resolution Add Filter
Applicable to: Encoders for BLDC motors and stepper motors, Smart Servos – Motors with integrated controller/drive, Stepper motors, LBA60 – BLDC linear actuator – 60 mm, Brushless DC motors, Wheel drives for robotics
Encoder Resolution SSI Add Filter
Applicable to: Stepper motors, LBA60 – BLDC linear actuator – 60 mm, Smart Servos – Motors with integrated controller/drive, Encoders for BLDC motors and stepper motors, Wheel drives for robotics
Encoder Signal Type Add Filter
Applicable to: Motor controllers/drives for BLDC and stepper motors, Stepper motors, Encoders for BLDC motors and stepper motors, Wheel drives for robotics
Encoder Voltage Add Filter
Applicable to: Stepper motors
For Motor Size Add Filter
Applicable to: Gearboxes for BLDC and stepper motors, Smart Servos – Motors with integrated controller/drive, Brakes for BLDC and stepper motors, Wheel drives for robotics, Brushless DC motors, Stepper motors
Height Add Filter
Applicable to: Encoders for BLDC motors and stepper motors, Keys, Wheel drives for robotics
Holding Torque Add Filter
Applicable to: Stepper motors, Smart Servos – Motors with integrated controller/drive
Moment of the motor when it's not running (energized)
Holding Torque (Brake) Add Filter
Applicable to: Brakes for BLDC and stepper motors, Brushless DC motors, Smart Servos – Motors with integrated controller/drive, Stepper motors
Moment of the closed brake (not energized)
Index Add Filter
Applicable to: Encoders for BLDC motors and stepper motors
Separate signal, once per revolution
Inductance per Winding Add Filter
Applicable to: Linear actuators with stepper motors, Stepper motors
Applicable to: Switching power supplies
Applicable to: Switching power supplies
IP-Protection Gearbox Add Filter
Applicable to: Gearboxes for BLDC and stepper motors, Wheel drives for robotics
IP-Protection Motor Add Filter
Applicable to: LBA60 – BLDC linear actuator – 60 mm, Brushless DC motors
IP-Protection Motor (Except Shaft Output) Add Filter
Applicable to: Smart Servos – Motors with integrated controller/drive, Gearboxes for BLDC and stepper motors, Stepper motors
Lead Add Filter
Length Add Filter
Applicable to: Smart Servos – Motors with integrated controller/drive, Gearboxes for BLDC and stepper motors, Keys
Length "A" Add Filter
Applicable to: Linear actuators with stepper motors, Brushless DC motors, Brakes for BLDC and stepper motors, Stepper motors, LBA60 – BLDC linear actuator – 60 mm, Smart Servos – Motors with integrated controller/drive
Total length of the motor body (exl. shafts)
Applicable to: Linear actuators with stepper motors
Line Driver Add Filter
Applicable to: Encoders for BLDC motors and stepper motors
Differential signal transmission
Line to Line Inductance Add Filter
Applicable to: Brushless DC motors
Inductance of a winding
Line to Line Resistance Add Filter
Applicable to: Brushless DC motors
Resistance of a winding
Load Capacity Add Filter
Applicable to: Wheel drives for robotics
Low noise Add Filter
Applicable to: Gearboxes for BLDC and stepper motors
Applicable to: Motor controllers/drives for BLDC and stepper motors
Max. Axial Play Add Filter
Applicable to: Linear actuators with stepper motors, Lead screws and threaded nuts, LBA60 – BLDC linear actuator – 60 mm, Smart Servos – Motors with integrated controller/drive
Max. Backlash Add Filter
Applicable to: Gearboxes for BLDC and stepper motors
Play within the gear when changing the direction
Max. Input Speed Add Filter
Applicable to: Gearboxes for BLDC and stepper motors, Wheel drives for robotics
Maximum input speed at the motor
Max. Operating Voltage Add Filter
Applicable to: Smart Servos – Motors with integrated controller/drive, Capacitors, Electronics
Max. Output Torque Add Filter
Applicable to: Gearboxes for BLDC and stepper motors, Wheel drives for robotics
Maximum moment that can be transmitted by the gear for a short time
Applicable to: LBA60 – BLDC linear actuator – 60 mm
Max. Tilting Moment Add Filter
Applicable to: Gearboxes for BLDC and stepper motors
Max. permissible tilting moment caused by an eccentric load acting on the gearbox output.
Maximum permissible power (for 1 s) Add Filter
Applicable to: Brake chopper
Maximum power in watts that may not be dissipated on the brake chopper for more than 1 second.
Moment of Inertia Add Filter
Applicable to: Gearboxes for BLDC and stepper motors, Brakes for BLDC and stepper motors, Wheel drives for robotics
Motor Connection Add Filter
Applicable to: Brushless DC motors, Stepper motors
Mounting bracket Add Filter
Applicable to: Wheel drives for robotics
Mounting Hole Diameter Add Filter
Applicable to: Lead screws and threaded nuts
Number of Analog Inputs Add Filter
Applicable to: Motor controllers/drives for BLDC and stepper motors, Smart Servos – Motors with integrated controller/drive
Number of Digital Inputs Add Filter
Applicable to: Motor controllers/drives for BLDC and stepper motors, Smart Servos – Motors with integrated controller/drive
Number of Digital Outputs Add Filter
Applicable to: Motor controllers/drives for BLDC and stepper motors, Smart Servos – Motors with integrated controller/drive
Number of Leads Add Filter
Applicable to: Stepper motors
Applicable to: Connection cables
Number of Threads Add Filter
Applicable to: Lead screws and threaded nuts
Operating Voltage Add Filter
Applicable to: Motor controllers/drives for BLDC and stepper motors, Smart Servos – Motors with integrated controller/drive, Brake chopper
Applicable to: LBA60 – BLDC linear actuator – 60 mm, Brakes for BLDC and stepper motors
Operating Voltage (Encoder) Add Filter
Applicable to: Encoders for BLDC motors and stepper motors, Stepper motors, LBA60 – BLDC linear actuator – 60 mm, Brushless DC motors, Wheel drives for robotics
Supply voltage of the encoder
Operating Voltage (f. level according to PLC standard) Add Filter
Applicable to: Encoders for BLDC motors and stepper motors
Output Current Add Filter
Applicable to: Switching power supplies
Output Voltage Add Filter
Applicable to: Switching power supplies
PC to adapter cable Add Filter
Applicable to: Converters
Peak Current (RMS) Add Filter
Applicable to: Smart Servos – Motors with integrated controller/drive, Motor controllers/drives for BLDC and stepper motors
Short-term peak current for max. 1s
Peak Force Add Filter
Applicable to: Linear actuators with stepper motors, LBA60 – BLDC linear actuator – 60 mm, Smart Servos – Motors with integrated controller/drive
Maximum force that a linear actuator can generate regardless of its service life.
Peak Output Add Filter
Applicable to: Smart Servos – Motors with integrated controller/drive
Peak Torque Add Filter
Applicable to: Brushless DC motors
Momentarily attainable torque, usually 3 times the nominal torque for approx. 5 s, then heat seizure => I2T
Applicable to: Connectors
Applicable to: Switching power supplies
Price Add Filter
Rated Current (RMS) Add Filter
Applicable to: Motor controllers/drives for BLDC and stepper motors, Smart Servos – Motors with integrated controller/drive
Maximum current in continuous operation
Rated Force Add Filter
Applicable to: LBA60 – BLDC linear actuator – 60 mm, Linear actuators with stepper motors
Continuous load to reach a service life of 1,000 h at 300 rpm.
Rated Output Speed Add Filter
Applicable to: Wheel drives for robotics
Linear speed (at the output) of wheel drives
Rated Output Torque Add Filter
Applicable to: Gearboxes for BLDC and stepper motors, Wheel drives for robotics
Moment that can be transmitted by the gear in continuous operation
Rated power (with external brake resistor) Add Filter
Applicable to: Brake chopper
Maximum continuous power in watts with external braking resistor.
Rated power (with integrated brake resistor) Add Filter
Applicable to: Brake chopper
Continuous power in watts with integrated braking resistor.
Maximum torque in continuous operation
Recommended Load Limit Add Filter
Applicable to: Linear actuators with stepper motors
Maximum short-term static load that may be reached when the service life is taken into account.
Reduction Ratio Add Filter
Applicable to: Gearboxes for BLDC and stepper motors, Wheel drives for robotics
Repetitive Positioning Accuracy Add Filter
Applicable to: Gearboxes for BLDC and stepper motors
Positioning error when approaching the same position repeatedly, starting from the same direction of rotation.
Resistance per Winding Add Filter
Applicable to: Linear actuators with stepper motors, Stepper motors
Resolution Add Filter
Applicable to: Stepper motors
Distance the motor travels per full step
Resolution Add Filter
Applicable to: Linear actuators with stepper motors, Smart Servos – Motors with integrated controller/drive
Rotor Inertia Add Filter
Applicable to: Brushless DC motors, Stepper motors
The rotor's moment of inertia
RS485 baudrates Add Filter
Applicable to: Converters
RS485 interface Add Filter
Applicable to: Converters
Runout of Output Table inner (Outer) Diameter Add Filter
Applicable to: Gearboxes for BLDC and stepper motors
Max. radial runout error of the inner or outer diameter of the gearbox in no-load condition.
Runout of Output Table Surface Add Filter
Applicable to: Gearboxes for BLDC and stepper motors
Max. axial runout error of the installation surface of the gearbox output in no-load condition.
Screw Coating Add Filter
Applicable to: Linear actuators with stepper motors, Smart Servos – Motors with integrated controller/drive
Screw Length Add Filter
Applicable to: Lead screws and threaded nuts
Screw Length "L" Add Filter
Applicable to: Linear actuators with stepper motors, Smart Servos – Motors with integrated controller/drive
Screw Straightness Add Filter
Applicable to: Lead screws and threaded nuts
Self-Locking Torque Add Filter
Applicable to: Gearboxes for BLDC and stepper motors
Shaft Add Filter
Applicable to: Stepper motors, Brushless DC motors
Shaft Diameter Add Filter
Applicable to: Brushless DC motors, Smart Servos – Motors with integrated controller/drive, Stepper motors, Brakes for BLDC and stepper motors
Applicable to: Linear actuators with stepper motors, Encoders for BLDC motors and stepper motors, Brakes for BLDC and stepper motors, Stepper motors, Brushless DC motors, Damper
Applicable to: Linear actuators with stepper motors, Stepper motors
Applicable to: Brushless DC motors
Applicable to: Smart Servos – Motors with integrated controller/drive, Stepper motors, Brushless DC motors, Shaft modification
Shaft Modification Add Filter
Please choose whether configured articles with shaft modifications should be shown or not.
Applicable to: Connection cables
Applicable to: Linear actuators with stepper motors
Length of the bushing integrated in the motor
Speed Add Filter
Applicable to: Linear actuators with stepper motors, LBA60 – BLDC linear actuator – 60 mm, Smart Servos – Motors with integrated controller/drive
Maximum feed - please note that the feed depends on several parameters, such as the supply voltage and the phase current; see torque curve
Standard Axial Play Add Filter
Applicable to: Lead screws and threaded nuts
Max. play between screw and nut
Step Mode Add Filter
Stroke Length "X" Add Filter
Applicable to: Linear actuators with stepper motors, LBA60 – BLDC linear actuator – 60 mm
Applicable to: Double shaft/cover for GSGE Gearboxes
Applicable to: Connection cables, Converters, Electronics
Applicable to: Damper
Thread Code Add Filter
Applicable to: Lead screws and threaded nuts
Thread Diameter Add Filter
Applicable to: Linear actuators with stepper motors, Lead screws and threaded nuts, LBA60 – BLDC linear actuator – 60 mm, Smart Servos – Motors with integrated controller/drive
Thread Lead Add Filter
Applicable to: Linear actuators with stepper motors, Lead screws and threaded nuts, LBA60 – BLDC linear actuator – 60 mm, Smart Servos – Motors with integrated controller/drive
Screw pitch in mm/distance traveled per revolution
Thread Type Add Filter
Applicable to: Linear actuators with stepper motors, Lead screws and threaded nuts
Torque Constant Add Filter
Applicable to: Brushless DC motors
Generated torque in proportion to the motor current
Twintus Connector Add Filter
Applicable to: Converters, Electronics
Type Add Filter
Applicable to: Gearboxes for BLDC and stepper motors
Type of Analog Input Add Filter
Applicable to: Motor controllers/drives for BLDC and stepper motors, Smart Servos – Motors with integrated controller/drive
Type of Digital Inputs Add Filter
Applicable to: Motor controllers/drives for BLDC and stepper motors, Smart Servos – Motors with integrated controller/drive
Type of Digital Output Add Filter
Applicable to: Motor controllers/drives for BLDC and stepper motors, Smart Servos – Motors with integrated controller/drive
Voltage per Winding Add Filter
Rated voltage per winding
Weight Add Filter
Applicable to: Linear actuators with stepper motors, Brushless DC motors, Gearboxes for BLDC and stepper motors, Smart Servos – Motors with integrated controller/drive, Brakes for BLDC and stepper motors, Stepper motors, Lead screws and threaded nuts, LBA60 – BLDC linear actuator – 60 mm, Motor controllers/drives for BLDC and stepper motors, Electronics, Damper, Encoders for BLDC motors and stepper motors, Wheel drives for robotics, Switching power supplies, Lubricants
Total weight of the motor
Wheel Diameter Add Filter
Applicable to: Wheel drives for robotics
Wheel drive Add Filter
Please choose whether configured articles with wheel drive should be shown or not.
Applicable to: Wheel drives for robotics
Applicable to: Wheel drives for robotics
Applicable to: Keys
Applicable to: Lead screws and threaded nuts
Please choose whether configured articles with flat shaft (D Cut) should be shown or not.

0 Results Product finder

0 Results

Article	Size	NEMA	Fieldbus	Interface	Rated Power	Rated Torque	Rated Speed	Encoder Type	Rated Voltage	Rated Current	Peak Current	Encoder	Price

Request quote

Dear Customer,

If you would like to request a quotation, please log in or register. In the shopping cart you will find the "Request a quote" button. You will find the instructions here.

For larger quantities, please contact our sales department: order@nanotec.de

Do you have any questions?

Our sales team is happy to answer any questions you may have about our products.

Contact Sales

Brushless dc motors with gearbox

Please wait while productfinder is loading ...

Product finder

0 Results

Please switch to another domain