Machined shaft

Machined shaft/Thinner shaft

Machined shafts are used primarily to attach toothed wheels, pinion, pulleys etc. with small diameter of bore directly on the motor shaft.

This machining is possible in all motors of the ST and IP, PD and DB series as well from an order quantity of 1 piece, but only from an order quantity of 100 pieces in the SP series.

Minimum distance from the flange: 3 mm

In addition, the machined shaft can also be manufactured with special end machining and higher tolerances, with threaded blind hole, undercut with specified groove widths and groove for the fixing of retaining rings etc. to your drawing data.

From 100 pieces, considerably more favorable prices barely above the price of the series-wound motor are possible due to series production.