Brakes

The safety brakes from Nanotec have a compact flange construction, are low-wear, fitted with asbestos-free friction pads and provide simple and quick assembly through the permanently adjusted air gap. The brakes are electromagnetically vented and can be used anywhere where moving masses are to be slowed in a very short time or defined to be maintained and the brake moment generated must be available – even if there is a power failure.
The braking force is applied with the aid of a pressure spring (BW brakes) or a permanent magnet. A voltage of 24V DC must be applied to all brakes for venting. Integrated brakes with plug connection allow operation in tough environmental conditions (IP54) and ensure fast and mistake-free wiring.
The Nano brake module (PWM controller) reduces the power and heat losses by 35%, thus enabling a higher stopping and activation time of the motor and eliminates the external suppression diode.

Series	Holding torque (Ncm)	Supply voltage (V)	Type
Brake BW	140	24	Compression spring
Brake BKE	40-200	24	Permanent magnet
Brake BL	24	24	Compression spring